Cobalt Networks Audio Embedder/De-embedder 9323 Bedienungsanleitung Seite 18
- Seite / 28
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Page 18 of 28 9323 Owner’s Manual •
••
• (V 2.1)
Output Polarity
If set to “Norm” output polarity is the same as input polarity, if set to “Inv” the output polarity is
inverted. This can be used to correct polarity errors in the input signals fed to the card.
Tone Frequency
This sets the frequency of the test tone for each of the four tone generators. Each of the four tone
generators TG1 – TG4 can be set to a different frequency, and are available as audio sources for the
embedded or AES audio outputs. The tones can range from 50Hz to 16kHz.
Display Submenu
Menu Structure Parameter Type
Disp H/V Display Orientation
BRGT Display Brightness
Display Orientation
This parameter lets you change the orientation of the display. “Vert” makes the characters look correct
when the cards are mounted in a 2 RU frame like the 8310. “Horz” makes the characters look right in a
horizontal frame.
Display Brightness
This parameter allows you to set the standard output brightness of the menu display. It is a percentage
of maximum brightness.
Preset Submenu
MENU STRUCTURE Parameter Type
Slct Select Preset
Save Save Settings
Load Load Settings
Prst
Fact Restore Factory Settings
Select Preset
Select from one of the five saved presets.
Save Settings
In this parameter, move the toggle switch up to save the settings to the card persistent storage.
Load Settings
In this parameter, move the toggle switch up to load the saved settings and make them active.
Restore Factory Settings
In this parameter, move the toggle switch up to make the factory default settings active, and make the
stored settings equal to the factory settings.
- Owner’s Manual 1
- • (V 2.1) Page 3 of 28 3
- Environmental Information 4
- Contents 5
- Introduction 6
- Software Version 7
- Functional Block Diagram 7
- Input and Output Video 8
- • (V 2.1) Page 9 of 28 9
- Documentation Terms 10
- Installation and Setup 11
- • (V 2.1) 12
- 9323 Owner’s Manual • 13
- • (V 2.1) Page 13 of 28 13
- RM-9323-E RM-9323-F 14
- Board Installation 15
- Menu Structure 16
- Card Control and Status 16
- Audio Submenu 17
- Display Submenu 18
- Preset Submenu 18
- Information Submenu 19
- Factory Default Settings 19
- AES IN/OUT Switch Settings 19
- Remote Control 20
- • (V 2.1) Page 21 of 28 21
- Technical Specifications 23
- Service Information 25
- Warranty and Repair Policy 26
- Ordering Information 27
- Contact Us 28
Euchner ES-XN podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Bezpieczeństwo Euchner ES-XN.
Dostarczamy 1 pdf podręczników Euchner ES-XN do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern